China Singapore Jingwei client, July 10 According to the news on the 10th of the website of the State Administration of market supervision, a few days ago, most of the automobile (China) Sales Co., Ltd., BMW (China) Automobile Trade Co., Ltd., Beijing Benz Automobile Co., Ltd., and Mercedes Benz (China) Automobile Sales Co., Ltd. have applied to the state in accordance with the \ Most of 1637 imported Bentley vehicles were recalled and V8were recalled Among them, most of the auto (China) Sales Co., Ltd. decided to recall 1637 imported Bentley V8 series cars manufactured from May 22, 2018 to February 27, 2020 from August 17, 2020. Source: weak product management center of State Administration of market supervision
recall the vehicles in the surrounding area due to the manufacturer's manufacture, because the quick joint of the fuel supply pipe in the engine compartment can be subject to inflammation degradation under the condition of permanent high temperature. In extreme cases, the rapid joint can show cracks and cause fuel leakage. In case of open fire, it can lead to the first fire in the engine compartment, and there is a hidden danger.
the company said that it would authorize dealers to replace the improved fuel supply pipe for the vehicles around the recall free of charge; for vehicles manufactured before November 27, 2018, it would also upgrade the engine limit flexibility to the latest version, optimize the engine compartment cooling performance, so as to eliminate the hidden danger. The dealers' stock vehicles will also be sold after eliminating weaknesses.
the company pointed out that before the vehicle was recalled and repaired, if the user smelled the fuel smell near the engine compartment, he / she should stop immediately and shut down the engine wechat express platform, and then the authorized dealer nearby would deal with the vehicle problem.BMW recalls 356 cars and 2651 motorcycles
BMW (China) Automobile Trade Co., Ltd. has decided to recall 356 wechat express platforms for imported BMW X3 m, X4 m and Z4 vehicles manufactured from December 11, 2018 to May 14, 2019 from July 24, 2020. The steering tie rods of the recalled vehicles are not as good as rollover under the specific conditions of excessive fluctuating loads (e.g. poor road conditions) as a result of excessive bending loads. The fracture of the steering tie rod will affect the handling and restriction of the vehicle, supplement the risk of accidents, and there is a hidden danger.BMW (China) Automobile Trade Co., Ltd. will replace the left and right steering tie rods for the vehicles around the recall free of charge, so as to eliminate the hidden danger. The company points out that before the vehicle is recalled and repaired, the owner should drive the vehicle seriously, and the relevant dealers should go for maintenance as soon as possible after the recall. Source: weak product management center of State Administration of market supervision In addition, BMW also decided to recall one-sided c400gt and c400x motorcycles on July 11, 2020. One is to recall 299 one-sided c400gt motorcycles produced between September 18, 2019 and January 16, 2020. Recall of the brake lamp light restriction procedure for one-sided vehicles in the surrounding area does not comply with the requirements of relevant national motorcycle regulations. BMW (China) Automobile Trade Co., Ltd. will upgrade the brake lamp light restriction program for the vehicles around the recall free of charge to meet the requirements of the relevant national motorcycle regulations. The second is to recall 2352 one-sided c400gt and c400x motorcycles produced between June 19, 2019 and January 15, 2020. Due to the lack of water-proof measures, the accelerator cable can accumulate water after the vehicle is washed or driven in rainy days. When the temperature is lower than 0 ℃
the company said that it would upgrade the vehicles around the recall area free of charge in two stages according to the supply of spare parts, so as to eliminate the hidden danger. The first stage of recall program: the planned recall will take place from July 11, 2020 to September 30, 2020. In order to recall all vehicles in the surrounding area, the following measures are taken: 1) remove the accumulated water in the throttle cable, fill it with antifreeze and seal it; 2) add drainage holes on the throttle cable guide; 3) remind users not to use high-pressure water gun to flush the throttle knob area of the vehicle. The second stage of recall program: the planned recall will take place from October 1, 2020 to September 30, 2021. After the spare parts are well supplied, replace the improved throttle cable and accelerator cable guide for all vehicles around the recall (c400gt models will replace one more matching plastic trim panel).BMW pointed out that before the vehicle is recalled and repaired, when the minimum temperature is lower than 0 ℃ Mercedes Benz recalls 5941 vehicles Among them, Beijing Benz Automobile Co., Ltd. decided to recall 4209 domestic C-class, E-class, GLC SUV and GLB SUV. The details of
are as follows: since September 25, 2020, a total of 3710 one-sided domestic C-class, E-class and GLC SUVs with production date from November 18, 2019 to December 2, 2019 will be recalled. Recall of the surrounding one-sided vehicles, due to the supplier's production error, the raw materials of the front seat height adjuster can not satisfy the request. When the vehicle collides, the external force can lead to the fracture of the pipe material, and the seat and occupant can move, so as to supplement the risk of occupant injury in the collision. The company announced that it would decide the Mercedes Benz authorized service center to check the manufacturing number of the front seat height adjuster on the affected side for the recall of vehicles in the surrounding area. If the number is confirmed to be affected or the number cannot be read, the seat height adjuster should be replaced to eliminate the hidden danger.Since July 17, 2020, 499 one-sided domestic GLB SUVs with production dates from April 18, 2020 to April 26, 2020 will be recalled. Due to the process characteristics, the light limiting unit can be damaged due to the risk of overpressure, and the right rear turn signal lamp can be constantly on, which can delay the occurrence of the fault and supplement the risk of accidents. In addition, the light limiting unit can show excessive inflammation, thus increasing the risk of the first fire, and there is a calm hidden danger. The company said it would decide that Mercedes Benz authorized service center would replace the light limiting unit for the recalled vehicles in order to eliminate the hidden danger. In addition, Mercedes Benz (China) Automobile Sales Co., Ltd. will recall 1732 imported S-class and gle SUVs. The details of
are as follows: since August 14, 2020, 803 imported S-class vehicles with 4.0-liter 8-cylinder engine, which were manufactured from March 29, 2017 to October 25, 2018, were recalled. Recall of vehicles in the surrounding area due to the development process error, two oil seal plugs on the engine can not withstand the maximum load generated when the vehicle is moving. The raw material of the sealing plug can fail due to high engine oil pressure, which is rare when the vehicle is in a strong driving process. If the engine oil level is lower than a certain limit value, the red warning news on the outer panel of the instrument will show the driver to be careful about this topic. If the driver does not pay attention to the warning news, the engine will run dry. In this case, if the driver does not pay attention to the warning news, the engine will run dry And rollover due to engine damage caused by the possibility of vehicle flameout, there are calm hidden dangers.
the company said that it would add reinforcement components to the oil sealing plug of the engine around the recall free of charge, so as to eliminate the hidden danger. After giving the red alarm news on the external panel of the instrument, the driver should immediately stop calmly and deal with the nearby authorized Mercedes Benz dealer.Source: weak product management center of State Administration of market supervision Since July 17, 2020, a total of 929 imported gle SUVs with electric adjustment function of the second row seats, which were manufactured from December 3, 2018 to September 20, 2019, were recalled. Recall the surrounding vehicles. Due to the assembly process error, the wiring harness under the right seat of the second row can not comply with the request for wiring. If the right seat of the second row is moved forward and backward, the wiring harness will be worn. For the vehicle equipped with rear side smooth air bag, the side smooth air bag of the seat can not do as expected, which adds to the risk of personal injury when the vehicle collides; in addition, if the occupant of this seat is not wearing Yitan ran belt, the driver can not be alerted, and there is a hidden danger of calm.
according to the company, the wiring harness under the second row right seat will be checked for the vehicles around the recall, and the damaged wiring harness will be corrected and repaired if necessary, so as to eliminate the hidden danger. The company woke up to avoid the damage to the wiring harness before the recall of the vehicles. Users should try not to adjust the second row right seats before and after. (Zhongxin Jingwei APP)